992 B
992 B
| 1 | bottom_fill_pattern |
|---|---|
| 2 | bottom_solid_layers |
| 3 | bottom_solid_min_thickness |
| 4 | bridge_angle |
| 5 | bridge_flow_ratio |
| 6 | bridge_speed |
| 7 | enable_dynamic_overhang_speeds |
| 8 | external_perimeter_extrusion_width |
| 9 | external_perimeter_speed |
| 10 | external_perimeters_first |
| 11 | extra_perimeters |
| 12 | extra_perimeters_on_overhangs |
| 13 | fill_angle |
| 14 | fill_density |
| 15 | fill_pattern |
| 16 | fuzzy_skin |
| 17 | fuzzy_skin_point_dist |
| 18 | fuzzy_skin_thickness |
| 19 | gap_fill_enabled |
| 20 | gap_fill_speed |
| 21 | infill_anchor |
| 22 | infill_anchor_max |
| 23 | infill_every_layers |
| 24 | infill_extrusion_width |
| 25 | infill_overlap |
| 26 | infill_speed |
| 27 | ironing |
| 28 | ironing_flowrate |
| 29 | ironing_spacing |
| 30 | ironing_speed |
| 31 | ironing_type |
| 32 | only_one_perimeter_first_layer |
| 33 | overhang_speed_0 |
| 34 | overhang_speed_1 |
| 35 | overhang_speed_2 |
| 36 | overhang_speed_3 |
| 37 | overhangs |
| 38 | perimeter_extrusion_width |
| 39 | perimeter_speed |
| 40 | perimeters |
| 41 | small_perimeter_speed |
| 42 | solid_infill_below_area |
| 43 | solid_infill_every_layers |
| 44 | solid_infill_extrusion_width |
| 45 | solid_infill_speed |
| 46 | thin_walls |
| 47 | top_fill_pattern |
| 48 | top_infill_extrusion_width |
| 49 | top_one_perimeter_type |
| 50 | top_solid_infill_speed |
| 51 | top_solid_layers |
| 52 | top_solid_min_thickness |